- About us
- Customer/smelting video
- Contact us
Five Maintenance Methods Of Induction Heating Furnace
Induction heating furnace in the processing, if not pay attention to maintenance, some unnecessary trouble often occurred , the following simple analysis of several methods of...
Analysis Of The Cause Of the Burning Of The Thyristor
During the use of medium frequency furnace, thyristor burning often occurs, which often annoy the maintenance workers of intermediate frequency furnace, and sometimes can ...
How To Repair The Copper Coil Penetration Of The Medium Frequency Furnace?
The intermediate frequency furnace body consists of 4 main parts: furnace shell, induction ring, lining and tilting furnace. The furnace shell is made of non-magnetic materi...
The Inverter Circuit Can Not Start, Or Difficult To Start
The main reasons why the inverters of intermediate frequency power supply can not start or start are difficult： (1) Interturn short circuit of induction coil. If the inductio...
How to span life of the medium frequency furnace lining?
Medium frequency furnace has good reputation in smelting heating equipment, exquisite workmanship and environmental protection. It is a good tool for industrial production. ...
Why the series circuit of medium frequency furnace energy saving?
1. The product has a high power factor to the power grid. The medium frequency IF power supply is a voltage type series inverter, the rectification has been working at zer...
Principle and difference between 6 pulse and 12 pulse thyristor rectifier
Abstract: This paper elaborates the principle and difference of 6-pulse and 12-pulse rectifiers from four aspects: theoretical derivation, measured data analysis, harmonic ana...
Comparison of series inverters and parallel inverters
Modern induction heating industry needs high-power, high power density, continuous large batch and environmentally clean induction heating equipment, which poses new challen...
Alkali metal refining process
The aluminum melt contains a large amount of trace elements, which has a certain negative impact on the properties of aluminum alloy. How to minimize these elements,...
time：Monday to Saturday 8:00-17:30
Scanning two dimensional code to share WeChat