- About us
- Customer/smelting video
- Contact us
Transmission loss:The loss caused by the induction power supply unit to the load supplied cable and bus is about 2% ~ 7%.
Transformation loss:The loss of converter elements, filter inductors, commutating inductors and compensation capacitors in the power supply cabinet is generally between 2% and 5%.
Induction furnace used for melting, tempering and insulation of various aluminium metals, and can operate in operation with the blast furnace.
Aluminium shell medium frequency induction copper melting furnace uses basic principle of induction heating.
"Induction heating"That is to say, electromagnetic induction is used to generate the induced current in the load so that the load can be heated.
The law of electromagnetic induction is also used e=W*-dΦ/dt
1、Good heat dissipation, low cost and small area.
2、Rapid smelting, low production cost, environmentally clean process and meeting the requirements of national environmental protection.
3、The furnace body is easy to pour. The metal composition is uniform and the temperature is uniform and easy to control.
4、It can be melted directly from the cold furnace, and the solution can be emptied completely,replace the melted material conveniently.
5、Low noise and good working environment.
6、According to the different requirements of various metal smelting, careful design.
7、All kinds of induction coils, rationally choose the thickness and specifications of copper tubes, so as to increase the utilization of electric energy.
8、Uses high performance insulation materials.
9、The inter turn gap of induction coil is easy to maintain and is conducive to water vapor release.
10、In order to improve the working environment, a smoke dust collecting device can be chosen.
time：Monday to Saturday 8:00-17:30
Scanning two dimensional code to share WeChat